Combination Headlight/Turn Signal Switch Replacement for Acura?

Combination Headlight/Turn Signal Switch
REMOVAL & INSTALLATION

The details are as follows :----

REMOVAL & INSTALLATION

1. Disable the air bag system .
2. Remove the lower panel of the dashboard, the knee bolster and/or the steering column covers, as necessary for your vehicle.

See Figure 1

Fig. Fig. 1: Typical combination headlight switch location.

3. Disconnect the switch wiring harness by gently depressing the tab on the connector and pulling.
4. Remove the combination switch mounting screws, then lift our the combination switch.
5. Installation is the reverse of the removal procedure.
6. Enable the air bag system.

This will help.

Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html