How to Replace Blower motor on Ford Taurus?

The procedure is same for Ford Taurus 2008 and 2009.

Blower Motor Removal & Installation Details are as follows :---


Remove the RH scuff plate trim panel.
Remove the RH cowl side trim panel.
Remove the RH lower instrument panel insulator.
Disconnect the blower motor electrical connector.
Release the 2 blower motor vent tube clips and detach the blower motor vent tube from the heater core and evaporator core housing.
Rotate the blower motor counterclockwise to disengage it from the housing and remove the blower motor.
To install, reverse the removal procedure.


This will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html

Blower motor replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

----------

Blower motor Resistor shorting problem?

http://schematicsdiagram.blogspot.com/2011/12/blower-motor-resistor-shorting-problem.html