How to Replace Engine Flywheel on Ford F series Trucks and Lincoln car models?

The procedure is similar for both ford and Lincoln car models:-----

The details are ford ford f series trucks and Lincoln mark LT car models.

For all engine models 4.2l,4.6l,5.4l,6.0l& 6.8l engine.

Flywheel

REMOVAL & INSTALLATION Procedure is mentioned below:-----

4.2L Engine

1. Before servicing the vehicle, refer to the Precautions section.
2. Remove the clutch. For additional information, refer to Clutch R&I in this section.
3. Remove the bolts and the flywheel.
4. To install, reverse the removal procedure. Tighten to 80 Nm (59 ft. lbs.) in a criss-cross pattern. 

Fig. 1. Flexplate bolts 2. Flywheel bolts 3. Flexplate 4. Flywheel 5. Crankshaft rear seal Flywheel or flexplate and related parts-4.2L engine

4.6L, 5.4L & 6.8L Engines

1. Before servicing the vehicle, refer to the Precautions section.
2. Remove the clutch. For additional information, refer to Clutch R&I in this section.
3. Remove the 8 bolts and the flywheel.
4. To install, reverse the removal procedure. Tighten to 80 Nm (59 ft. lbs.) in the sequence shown. 
   
   
   
   Fig. 1. Flexplate bolts 2. Flexplate 3. Flywheel bolts 4. Flywheel 5. Rear cover plate 6. Crankshaft oil slinger 7. Crankshaft rear seal 8. Oil pan bolts 9. Crankshaft rear seal retainer plate bolts 10. Crankshaft rear seal retainer plate Flywheel or flexplate and related parts-4.6L, 5.4L and 6.8L engine
   
   
   
   

   

   Fig. Flywheel bolt torque sequence-4.6L, 5.4L and 6.8L engine

6.0L Diesel Engine

1. Before servicing the vehicle, refer to the Precautions section.
2. Remove the Transmission. For additional information, refer to Manual Transmission R&I in this section.
3. Remove the clutch pressure plate and disc. For additional information, refer to Clutch Disc and Pressure Plate in this section.
4. Remove the bolts. Install the guide studs.
5. Remove the bolts.
6. Remove the reinforcing ring and the flywheel and ring gear assembly.
7. Remove the guide studs.
   
   
   

   

   Fig. Flywheel-6.0L Diesel Engine

To install:

1. Install the guide studs.
2. Install the flywheel and ring gear assembly.
3. Install the bolts.
4. Remove the guide studs. Install and tighten the bolts to 93 Nm (69 ft. lbs.).
5. Install the clutch disc and pressure plate.
6. Install the transmission.

These details will help.

Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html