Wiper/Washer Switch Replacing on Acura?

Wiper/Washer Switch:

The details are as follows :----

REMOVAL & INSTALLATION

1. Disable the air bag system.
2. Remove the lower panel of the dashboard, the knee bolster and/or the steering column covers, as necessary for your vehicle.

See Figure 1

Fig. Fig. 1: The upper and lower cover must be removed to access the switch

3. Disconnect the harness by gently depressing the tab on the connector and pulling.

See Figure 2

Fig. Fig. 2: Typical wiper/washer switch location.

4. Unfasten the wiper switch mounting screws, then remove the switch.
5. Installation is the reverse of the removal procedure.
6. Enable the air bag system.

This will help.

Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html